Product details / Made to order
Made with purpose. Finished your way.
Everything you need to know about the piece, its options and what to expect from a made-to-order Potify3D print.
Billy Kid Revolvers – Zenless Zone Zero Cosplay Props
Bring Billy Kid's signature dual revolvers to your cosplay with this made-to-order 3D printed revolver set, based on the original model by Goowah.
Designed specifically for Billy Kid from Zenless Zone Zero, the set includes both the left and right revolvers, with the subtle differences between the two grip designs retained from the original model.
These are manufactured as dedicated cosplay and display props. They are not functional firearms and contain no firing or projectile mechanism.
Choose Your Finish
Raw Print – Unassembled Parts
Supplied as 3D printed components with supports removed and basic clean-up completed. Some visible layer lines, support marks and print texture should be expected. Ideal if you'd like to assemble, sand and paint the revolvers yourself.
Sanded & Primed – Ready to Paint
The printed components are cleaned, assembled where appropriate, filled, sanded and primed, leaving you with a prepared pair of revolvers ready for your own final colours and detailing.
Complete – Finished & Painted
Fully prepared, assembled and hand-painted to closely match Billy Kid's revolvers as they appear in Zenless Zone Zero. Ready for cosplay, photography or display.
What's Included
This listing is for a pair of Billy Kid revolvers – one left and one right.
The original Goowah design separates each revolver into multiple printable components, including the barrel, cylinder, grip and smaller detail pieces.
Although the two revolvers share most of their construction, the ends of the grips feature dedicated left and right variants, which are reproduced accordingly in the finished set.
Reinforced Construction
The original design incorporates an approximately 10 mm internal tunnel through the model for alignment and reinforcement.
Where appropriate, Potify3D may use an internal rod or similar reinforcement within assembled versions to improve alignment and provide additional strength to the finished cosplay prop.
This is particularly useful for a convention prop where the revolvers may regularly be handled, transported and used during photoshoots.
Cosplay Prop Design
Goowah's model incorporates separation between the barrel assembly and barrel guard that allows for some movement in the original design.
However, these products are manufactured and sold strictly as cosplay/display props. They contain no firing mechanism, projectile system or functional firearm components.
Any movement present is purely part of the prop's physical construction and should not be interpreted as firearm functionality.
3D Printed to Order
Every set is 3D printed to order by Potify3D using FDM manufacturing.
Because these are individually manufactured and hand-finished cosplay pieces, subtle layer lines, sanding marks and small handmade variations may remain depending on the selected finish. These are normal characteristics of FDM-manufactured props and help distinguish each piece from mass-produced replicas.
Made for Cosplay
The revolvers are suitable for:
- Billy Kid cosplay builds
- Conventions and cosplay events
- Photography and photoshoots
- Costume displays
- Prop collections
Need the revolvers produced at a particular scale? Get in touch before ordering and we can discuss your requirements.
Important Information
- Listing includes one left and one right revolver
- Physical 3D printed products only — no STL or digital files are supplied
- Intended solely for cosplay, photography and display
- Non-functional cosplay props
- No firing or projectile mechanism
- Made to order using FDM 3D printing
- Minor print lines and handmade finishing variations are normal
- Finished colours may vary slightly from promotional imagery
- Promotional imagery may include digital visualisations. Please see product photos for examples of our 3D printed and hand-finished work.
- Please check the rules of your convention/event before bringing replica weapon props
- Do not carry or display replica weapon props irresponsibly in public spaces
Designer Credit
Original 3D model designed by Goowah.
Physical prints are produced and sold by Potify3D with permission from the designer. The original digital model is available directly from Goowah on Cults3D.