La Signora Crimson Witch Mask - Genshin Impact Cosplay Accessory

La Signora [Crimson Witch] Mask – Genshin Impact Cosplay

Complete your La Signora Crimson Witch cosplay with this made-to-order 3D printed mask, based on the original model by Goowah.

Designed around La Signora's dramatic Crimson Witch appearance, this is an elaborate multi-part cosplay piece featuring the central mask, large sweeping horn-like decorative sections and intricate central details.

Potify3D's standard version uses Goowah's complete Version 2 design, including the full set of 3D printed decorative components.

Choose Your Finish

Raw Print – Unassembled Parts
Supplied as the individual 3D printed components with supports removed and basic clean-up completed. Some visible layer lines, support marks and print texture should be expected.

Ideal if you'd like to assemble, fill, sand and paint the mask yourself.

Sanded & Primed – Ready to Paint
Components are cleaned, assembled where appropriate, seams filled, sanded and prepared with primer, leaving the mask ready for you to apply your own final colours and detailing.

Complete – Finished & Painted
Fully prepared, assembled and hand-painted by Potify3D to closely match La Signora's Crimson Witch appearance. Ready to incorporate into your cosplay.

What's Included

Potify3D's standard product is based on the complete Version 2 design and includes the 3D printed components required to create the full mask, including:

• Central face mask
• Two large mirrored sweeping horn/wing assemblies
• Three central antenna/spire details
• Lower decorative mask elements
• Associated printed components required for assembly

The individual components are manufactured separately before being assembled into the complete mask.

Raw Print orders are supplied as individual printed components for you to assemble and finish yourself.

Sanded & Primed orders are prepared and assembled where appropriate, with seams filled and surfaces primed ready for painting.

Complete orders are fully assembled, prepared and hand-painted by Potify3D.

Complete & Simplified Versions

Goowah designed two versions of the Crimson Witch mask.

Version 1 is a simplified version of the mask without the large upper horn and antenna accessories. This version was designed for makers who may prefer to create these elements separately using lightweight materials such as EVA foam.

Version 2 incorporates the complete set of 3D printable decorative elements and creates the full, elaborate Crimson Witch silhouette.

Potify3D's standard product uses Version 2, with the decorative components produced as 3D printed parts.

If you would prefer the simplified Version 1 for your own custom build, please contact us before ordering.

Lightweight Cosplay Construction

The complete Version 2 design contains several large decorative components, so particular care is taken during manufacture to minimise unnecessary weight while maintaining a practical structure for cosplay use.

The larger horn/wing sections are printed with reduced internal material where appropriate. Their multi-part construction also allows the individual sections to be properly prepared before final assembly.

Due to the size and elaborate shape of the complete design, this is naturally a more substantial wearable piece than a conventional face mask.

Because this is an FDM-manufactured cosplay piece, the finished product may retain subtle layer lines, sanding marks and small handmade variations. These are normal characteristics of individually manufactured and hand-finished 3D printed props.

Sizing & Wear

The complete design can be proportionally scaled before printing.

If you require the mask to be adjusted for a particular face or head size, please contact Potify3D before ordering and we can discuss your requirements.

Final mounting may vary depending on your wig, costume and preferred wearing method.

Wig, costume, straps and specialist mounting hardware are not included unless specifically stated.

Made to Order

Every La Signora Crimson Witch Mask is 3D printed to order by Potify3D and can be supplied at different stages of finishing depending on how much of the build you'd like to complete yourself.

Each piece is individually manufactured rather than mass-produced, allowing us to carefully prepare the components for your selected finish.

Need a different size or have a particular mounting requirement? Get in touch before ordering and we can discuss your cosplay.

Important Information

• Physical 3D printed product only — no STL or digital files are supplied
• Intended for cosplay, photography and display
• Made to order using FDM 3D printing
• Potify3D's standard product uses Goowah's complete Version 2 design
• Minor print lines, sanding marks and handmade finishing variations are normal
• Finished colours may vary slightly from promotional images
• Wig, costume and other accessories shown in reference imagery are not included
• Promotional imagery may include digital visualisations. Please see product photos for examples of our 3D printed and hand-finished work.

Designer Credit

Original 3D model designed by Goowah.

Physical prints are produced and sold by Potify3D with permission from the designer. The original digital model is available directly from Goowah on Cults3D.